manualshive.com logo in svg

MBM PULSE 26 UNISEX, User Manual

Share
Download
MBM PULSE 26 UNISEX User Manual Download Page 24

PULSE

 USER MANUAL

p.24

6.2.5  Brakes regulation

Adjust the brake lever to ensure a firm grip on the handlebar even when braking.

To apply maximum braking power to the lever, the following adjustments can be made:
- Rotate the brake lever using the tightening screw (Ref. U - Figure 16) until reaching a comfortable hand position.
- Vary the stroke of the brake lever by acting on the adjuster (Ref. T - Figure 16).

Warning: Excessive travel of the brake lever leads to contact of the same with the knob, limiting the braking ac-
tion and causing possible crushing of the fingers.

6.2.6  Suspensions regulations

At this point, adjust the suspensions to make the use of the 
pedal assisted bicycle more comfortable.

Depending on the route and the load on the vehicle, it is possi-
ble to vary the stiffness of the fork by means of a special lever 
placed on the left side of the fork (Ref. S - Figure 15).

FIG. 15

FIG. 16

Summary of Contents for PULSE 26 UNISEX




































Reviews:

No comments

Brands by name

Popular brands

Load more brands