manualshive.com logo in svg

MBM PULSE 26 UNISEX, User Manual

Share
Download
MBM PULSE 26 UNISEX User Manual Download Page 20

PULSE

 USER MANUAL

p.20

5. LIFTING AND TRANSPORT

5.1 Lifting

The weight of the E - PULSE model assisted pedal bicycle is such that it can be lifted and transported by one person, also 
due to its overall dimensions.
The optimal solution for carrying out the movement is to grab a handlebar grip and the rear part of the saddle.

5.2 Transport

To ensure the safety of transport in vans, it is necessary to prevent the pedal-assisted bicycle from moving. This is achieved 
by binding it with anchoring bands or cables in good condition.
In this regard, the coupling devices must be installed in such a way as not to damage the frame and other parts of the 
bicycle.

The manufacturer is not liable for breakages caused by lifting and / or transporting the 
pedal assisted bicycle after delivery.

CRUSHING AND IMPACT
• During lifting, you must operate with extreme caution to avoid damage to people and property.
• This operation must be performed by sturdy people.

RISK OF INJURY
• ALWAYS make sure that the frame and handlebar adjustment screws are tightened before each ride. Otherwise, 
accidents, even serious ones, could result!

DANGER

DANGER

Summary of Contents for PULSE 26 UNISEX




































Reviews:

No comments

Brands by name

Popular brands

Load more brands