manualshive.com logo in svg

MBM HYPERION 29, User Manual

Share
Download
MBM HYPERION 29 User Manual Download Page 36

HYPERION

 USER MANUAL

p.36

8. MAINTENANCE

8.1 General

To maintain the full functionality of your pedal assisted bicycle for a long period, it is necessary to carry out maintenance 

as prescribed, with correctness and professional skills.

After each routine maintenance operation, a check on the perfect functioning of all the controls is mandatory.

INJURY ISKS

During all maintenance work, follow the appropriate safety measures. All maintenance operations must be carried out with 

the battery disconnected from the pedal-assisted bicycle and from the battery charger and the bicycle resting in a stable 

manner, making use of special support elements.

DANGER

8.2 MAINTANENACE AND DAILY CHECK

8.2.1  Control of labels and pictograms

Check the legibility and presence of the CE plate, and of the warning stickers affixed to the bodywork 

of the bicycle.

8.2.2  Wheels checks

Using the appropriate inflation valve on the rims, check the inflation pressure of the tires using a com-

pressor and a gun with a pressure gauge, or a pump. Check the condition of the tread, the rim and the 

attachment of the rims to the hubs. In the event of a tire replacement, contact your authorized dealer 

or a qualified tire dealer.

8.2.3  Brakes check

The brakes must be adjusted in such a way as to ensure effective braking and at the same time the control levers must 

have adequate travel, in order to modulate the braking: in other words, the brakes must not be too slow or too tight.

Check that the brake discs and pads are not contaminated with oils or soaps. Check the effectiveness of the braking sys-

tem on flat ground and at low speeds. Check the wear of the brake pads annually by visiting authorized personnel.

Adjusting the brake regulation

Adjustment of the brakes must only be carried out by authorized personnel.

ATTENTION

Do not inflate the tires beyond the allowable value 

indicated by the manufacturer on the side surface of the 

tires.

Summary of Contents for HYPERION 29












































Reviews:

No comments

Brands by name

Popular brands

Load more brands