manualshive.com logo in svg

MBM HYPERION 29, User Manual

Share
Download
MBM HYPERION 29 User Manual Download Page 18

HYPERION

 USER MANUAL

p.18

RESET TRIP

THE RESET TRIP ITEM ALLOWS YOU TO RESET ALL THE RECORDED LAP DATA BY RETURNING THE

COUNTERS TO ZERO (0).

ADVANCED

SELECTING THIS FUNCTION YOU ENTER THE ADVANCED SETTINGS MENU.

SYSTEM INFO

IN THIS SCREEN IT IS POSSIBLE TO VIEW THE VERSIONS OF THE FIREWARE, THE INSTALLED HMI AND

THE ASSOCIATED ENGINE.

BATTERY INFO

BY SELECTING THIS FUNCTION YOU CAN VIEW THE BATTERY INFORMATION.

BACKARDS

SELECTING THIS FUNCTION RETURNS TO THE INITIAL SCREE

3.9  Menu

By pressing the "UP" + "DOWN" buttons (Ref. F - G - Figure 5) at the same time for two seconds, it is possible to open the 

menu screen. From any screen, by holding down the "POWER" button for 2 ", you can return to the last Home screen dis-

played. Once entered, it is possible to move in the menu with the "UP" and "DOWN" buttons and press "POWER" to enter.

Attention:

Before pressing the F and G buttons at the same time (Figure 5), position yourself firmly on the bike 

and activate the brake, so as not to accidentally activate the starting mode from a standstill.

ATTENTION

Selecting the ADVANCED setting you enter the advanced settings menu, 

within which you can change or check the essential parameters of the 

display. Specifically, you can change the brightness, language, unit, 

weight, gender and night mode.

FIG. 4.5

FIG. 4.4

Summary of Contents for HYPERION 29












































Reviews:

No comments

Brands by name

Popular brands

Load more brands