manualshive.com logo in svg

MBM HYPERION 29, User Manual

Share
Download
MBM HYPERION 29 User Manual Download Page 25

HYPERION

 USER MANUAL

p.25

3.11.3  Battery charge

Recharging the battery of the pedal assisted bicycle can only be done by removing the battery. To charge the battery pro-

ceed as follows:

1- Turn off the assistance system of the pedal-assisted bicycle using the appropriate "MODE" button (Ref. H in Figure 5); 2- 

Remove the battery;

3- Connect the battery charger supplied to the socket with the appropriate plug at the bottom of the battery;

4- Connect the battery charger to a power socket (230 V / 50 Hz) and let the battery charge for the necessary time.

ATTENTION

CHARGER

Always connect the plug to the bat-

tery first and then the battery charg-

er to the power outlet.

FIG. 9

3.11.4 Problem solving

ATTENTION

TROUBLESHOOTING

In the event that the assistance system does 

not activate even if the battery is charged, 

contact the authorized dealer.

PROBLEM

 

CAUSE/SOLUTION 

System doesn’t work 

Check if the battery is full.

PROBLEM

 

CAUSE/SOLUTION

Assistance doesn’t go 

Check if the battery is full.

Summary of Contents for HYPERION 29












































Reviews:

No comments

Brands by name

Popular brands

Load more brands