MBM AeroFold 1500S, Operation Manual

Page: 19 / 52

19
(7) Directions for use
To start using this machine, following is described for paper size A3 and 80g/m2 offset paper with
Single Fold at medium speed 3. This introductory operation makes the user to operate the machine
easier for applied applications.
As the user becomes familiar with the machine, it is recommended to use other paper sizes, paper
weights, folding patterns and different speeds.
(A) Standard folding of standard-size paper
Prepare approximately 200 sheets of Ledger, 11 x 17 inch, 20 lbs Bond. Paper corners must be
exactly 90 degree angles.
1. Turn power switch on.
2.
Skew Adjustment Knob for Feed Table
Make Paper Feed Table square to machine Front Wall by rotating Skew Adjustment Knob.
Center the scale indicator.
NOTE: Skew Adjustment Knob is used for the paper which weighs
more than 34.3 lbs Bond unless otherwise needed.
3. Feed Roller Direction Adjustment Dial
Loosen Thumb Screw. Rotate Feed Roller Direction Adjustment Dial and let Pin centered to the Scale.
Tighten Thumb Screw.
NOTE: Feed Roller Direction Adjustment Dial is used for the paper which weighs less than 34.3 lbs Bond
unless otherwise needed. Use Skew Adj. Knob when Feed Roller Direction Adj. Dial is not effective.
Paper Spacer
L Paper Guide
Spring loaded inside
L Paper Guide
Machine
Front Wall
Thumb
Screw R
R Paper
Guide
L Stopper Guide
Skew Adjustment Knob for Feed Table
Paper Feed Table
Thumb Screw
Feed Roller Direction
Adjustment Dial
Pin and Gauge
Thumb
Screw L
Scale
Indicator
www.WhitakerBrothers.com