MBK FlameX NXC125, Owner'S Manual

Page: 26 / 76

3-10
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
EAU15300
Sidestand
The sidestand is located on the left side
of the frame. Raise the sidestand or lower
it with your foot while holding the motor-
cycle upright.
NOTE:
The built-in sidestand switch is part of
the ignition circuit cut-off system, which
cuts the ignition in certain situations.
(See further down for an explanation of
the ignition circuit cut-off system.)
EWA10240
w
The vehicle must not be ridden with
the sidestand down, or if the
sidestand cannot be properly moved
up (or does not stay up), otherwise
the sidestand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
MBK’s ignition circuit cut-off system
has been designed to assist the op-
erator in fulfilling the responsibility
of raising the sidestand before start-
ing off. Therefore, check this system
regularly as described below and
have an MBK dealer repair it if it does
not function properly.
EAUT1091
Sidestand switch operation
check
Check the operation of the sidestand
switch against the information below.
EWA10260
w
8 8
8 8 8
The vehicle must be placed on
the centerstand during this in-
spection.
8 8 8 8 8
If a malfunction is noted, have an
MBK dealer check the system be-
fore riding.
5ML-F819U-E0ch3re.pmd 2003/12/12, 16:12 10