background image

3-8

1

2

3

4

5

6

7

8

9

INSTRUMENT AND CONTROL FUNCTIONS

EAU14300

Helmet holder

ZAUM00**

1

1. Helmet holder

The helmet holder is located under the
seat.

To secure a helmet to the helmet
holder

1. Open the seat. (See page 3-7.)
2. Attach the helmet to the helmet

holder, and then securely close the
seat.

EWA10160

w

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.

To release the helmet from the hel-
met holder

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

EAU14510

Storage compartment

ZAUM00**

1

1. Storage compartment

There is a storage compartment under
the seat. (See page 3-7.)

EWA10960

w

8

8

8

8

8

Do not exceed the load limit of  5
kg (11 lb) for the storage com-
partment.

8

8

8

8

8

Do not exceed the maximum
load of 170 kg (374 lb) for the ve-
hicle.

ECA10080

c

C

Keep the following points in mind
when using the storage compart-

5ML-F819U-E0ch3re.pmd

2003/12/12, 16:12

8

Summary of Contents for FlameX NXC125













































































Reviews: