9
Subwoofer Output:
Press and hold the
EQ
button to turn subwoofer
output On and Off. “SW” appears in the display
when the subwoofer is On and “SW” does not
appear when the subwoofer output is Off.
Loudness:
To boost high and low tones at low volume lev-
els, press and hold the
ENT BND
button until
“LOUD ON” appears in the display. To deselect,
press and hold the
ENT BND
button again until
“LOUD OFF” appears in the display.
Mute:
Press and release the
MUTE
button to mute the
volume level. If a disc is playing the
MUTE
but-
ton will pause the disc. Press the
MUTE
button
again to restore the volume or resume playing
the disc.
Equalizer (EQ):
Press the
EQ
button to choose between the pre-
set equalizer settings: FLAT, CLASSICS, POP M,
ROCK M, JAZZ and DSP OFF as indicated in the
display area.
Subwoofer Cutoff Frequency (SWF):
1. Select the Subwoofer Cutoff Frequency mode
(SWF) by pressing the
SETUP
button.
2. To adjust the Subwoofer Cutoff Frequency
press the or button.
SWF 160 = Low Pass 160Hz
SWF 120 = Low Pass 120Hz
SWF 80 = Low Pass 80Hz
3. After 5 seconds control reverts back to volume
control.
Note:
If subwoofer output is turned off, Subwoofer
Cutoff Frequency mode is not accessible. See
Subwoofer Output (below) for more information.
Sound Controls
(Continued)
DVD
