background image

2

Thanks for choosing MB QUART! The UTV-Tuned 2-speaker, 400 watt system for applicable Can-Am 

Maverick X3 vehicles (2017 and up) is engineered for your vehicle. The installation process is simple and 

straightforward. Installation following these detailed instructions can be completed in about 2 hours.

 INSTALLATION OVERVIEW VIDEO 

 

Many of our vehicle-specific products feature 

a “how to” install video with additional details 

on making your installation successful. 

Where available, locate your specific video 

on the website. Type your model number 

(MBQX-POD-1) into the search box, then 

click on the INSTALL & SUPPORT tab.

WHAT’S INCLUDED

As you unpackage the MBQX-POD-1 system, account for all components before attempting installation. 

Please note some components required to complete an audio system in your Can-Am X3 (such as a 

source unit, amplifier power/ground wiring, fuse/fuse holder, speaker wiring, RCA audio cable, etc.) 

are not included. See page 6 for details of what else you’ll need. 

    What’s In The Box?  

    ● Compact 2 channel, Class D 400 Watt Amplifier*

    ● Two Dash Panel-Mounted 6.5 inch Coaxial Speakers in Vehicle-Specific Replacement Panels

    

         *

Optional Amplifier Mounting Plate (MBQX-SUB-ACC-1) is found at MBQuart.com

*AMPLIFIER MOUNTING

 – 

An amplifier mounting plate (MBQX-SUB-ACC-1) to safely 

mount the NA2-400.2 amplifier to the Can-Am front cage behind the driver side dash is 

available at MBQuart.com. If not using this amplifier mounting plate, you need to determine 

and accomplish your own amplifier mounting strategy. Instructions on this accessory 

mounting plate and how to install this kit are included in this manual.

NOTE

 – Do not dispose of any packaging until you have completely installed your system and are certain 

you have accounted for every piece.  If you feel something is missing, please contact Maxxsonics directly 

via email – [email protected]

OTHER CAN-AM X3 SPECIFIC PRODUCTS

 – MB Quart has thoughtfully created a range of vehicle-

specific audio system products for your Can-Am X3. Everything from source units to subwoofers is available 

at www.MBQuart.com. See page 16 for details.

WARRANTY

Your audio system is covered by a 1 year warranty from the date of invoice. It is important to retain your 

sales receipt. Furthermore, it is crucial that you record and store a record of the serial numbers for each of 

the components that are included in your system. In the rare instance that a warranty claim is needed both 

proof of purchase and serial numbers are required. Additional information on the back page. 

TECHNICAL SUPPORT

For additional technical information, go to the “SUPPORT” tab at MBQuart.com. There you will find helpful, 

FAQ, TEQ Tips and you can contact Technical Support via email.

INTRODUCTION

MBQX-SUB-

ACC-1

Summary of Contents for MBQX-POD-1



















Reviews: