22
For additional technical information
, go to the “SUPPORT” tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
STEP 3 - Remove any tape from the fenders. With the included hardware, mount the pod. The
bolt and 1 washer mount through the fender into the pod. This leaves only the head of the bolt
visible behind the tire shown in FIG 9-4.
NOTE - Make sure that the wires behind the enclosure have remained accessible
for connecting to the harness. Use some painters tape to keep them from getting
blocked by the enclosure.
STEP 4
– Push the included bolt through a washer then through the fender
This will come through the fender and into the kick panel speaker enclosure.
(FIG 9-4)
BOLTS
&
WASHERS
