18
For additional technical information
, go to the “SUPPORT” tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
CHAPTER 8
– DUAL AMPLIFIER & SPEAKER HARNESS CONNECTIONS
With your amplifier(s) mounted, we can now start laying in the speaker harness and plugging in
all the connectors.
NOTE
– While you are working on your system, we recommend covering the
amplifiers to avoid scratching them or inadvertently hitting the crossovers with a
wrench or screw driver.
STEP 1
– Plug in the power/ground connector of the two channel and the mono amplifier. At the
same time, if you have illumination, connect the red/black. Additionally, you can connect the
subwoofer and full range speaker connectors. See FIG 8-1.
NOTE
– The following shows the Bluetooth controller in place, this is only
reference for the amplifier connections that are mounted on the dual amplifier
plate.
Review the full system wiring harness on Chapter 14.
(FIG 8-1)
