background image

- 3 -

• 

The router may only be connected to de

vices, 

which meet the requirements of EN 60950.

• 

The router is for indoor use only.

• 

Never open the router chassis. Unauthorized 

opening and improper repair can pose a danger 

to the user. Unauthorized modifications are not 

covered by the manufacturer’s warranty.

1  Safety instructions

•  Only qualified specialist personnel may install, 

start  up,  and  operate  the  router.  The  national 

safety and accident prevention regulations must 

be observed.

• 

The device is built to the latest technological 

standards and recognized safety standards 

(see Declaration of Conformity).

• 

The device is only intended for operation in the 

control cabinet and with SELV according to IEC 

60950/EN 60950/VDE 0805. 

   

Opening up the device voids the warranty!
NOTE: Electrostatic Discharge!

  

Observe the necessary safety precautions when handling components that 

are vulnerable to electrostatic discharge (EN 61340-5-1 and IEC 61340-5-1)!

 

2  Maintenance

The mbNETFIX Industrial Firewalls are maintenance-free units.

If an mbNETFIX have damage or malfunction, the device must be 

immediately taken out of service and secured against unintentional operation.

HINWEIS

Regardless of the maintenance-free hardware, there is a need for action in terms of IT security.

 

• 

Keep the software / firmware up to date.

• 

Keep yourself informed about security updates of the product.

Informationen hierzu finden Sie unter 

www.mbconnectline.com

Summary of Contents for 5.100.200.02.00

















Reviews: