9
Technical Data
Measuring inputs:
F1:
Temperature sensor Pt100 (DIN IEC 751, three-wire connection),
measuring range Pt100 (Class B): -60.0 °C...400 °C (with suitable sensor and
<1 Ohm wire resistance), accuracy: +/- 0.5 K +/- 0.5% at 25 °C (not including any sensor errors),
+/- 1K +/- 0.5% over the entire temperature range 0 to 55 °C (not including any sensor errors)
Display and indicators:
Three-digit red LED display, 13 mm high, for temperatures
Three LEDs, diameter 3 mm, for status indication
LED 1: regulation contact 1
LED 2: regulation contact 2
LED 3: Alarm
Outputs:
K1: Relay, 250 V~, maximum switched current 8 A, (cos
ϕ
=1),
maximum continuous current 6 A, make contact, suitable for electric motors up to 0.5 HP. Function: see parameter A90
K2:
Relay, 250 V~, maximum switched current 8 A, (cos
ϕ
=1),
maximum continuous current 6 A, make contact, suitable for electric motors up to 0.5 HP. Function: see parameter A91
K3:
Relay, 250 V~, maximum switched current 6 A, (cos
ϕ
=1),
maximum continuous current 3 A, make contact, suitable for electric motors up to 0.5 HP. Function: see parameter A92
Supply voltage:
230 V~ 50/60 Hz, maximum power consumption 4 VA
Terminals:
12-pole screw-terminal plug strip, spacing 5.0 mm, for cables up to 2.5 mm²
Temperature range:
-99 to 999 °C, factory setting: alarm if actual value is below -10 °C or above 120 °C
Ambient conditions:
Storage temperature –20 °C...+70 °C
Operating temperature 0...55 °C
Maximum relative humidity 75% (no condensation)
Degree of protection:
IP65 from front, IP00 from rear
Installation:
Designed for panel mounting
Front-panel dimensions 84 x 42 mm
Panel aperture 67.5 x 31.5 mm
Installation depth approx. 85 mm
Secured with screw-on bow
Install flat gasket between panel and front frame of controller
Weight:
approx. 140 g (without sensor)
Terminal assignments:
