Page 27 on 42
2022/09/27
MEG010XN102-A11 (ENG)
This curve can then be found in the
summary table of the sessions in the
patient file
.
5.4.3.6
V: Blind work
A "blind mode" is available to work without the
feedback of contractions on the screen.
This mode is activated during the session, in the
zone selection menu.
The curves are recorded, and can be analysed at
the end of the session
5.4.3.7
V: Assisted Biofeedback
This mode, available for adjustable programmes, is activated either before starting the programme or
from the side panel
Stimulation is then used to reinforce the muscular work:
-
Or on a lack of support: good start of contraction, but insufficient support at the end of the plateau
Or on a contraction that is too weak: detection of a contraction, but insufficient to reach the plateau
-
Trigger point
Setting the trigger
threshold
Viewing a
current stimulus
BFB falls
below the
threshold
Voluntary contraction does
not reach the threshold
