Page 23 on 42
2022/09/27
MEG010XN102-A11 (ENG)
5.4
Launching a programme
From the program selection page, a program can be started by clicking on the
button in the
program description section, or on the
icon in the upper right corner of the program name.
A programme is composed of one or more pages that are linked after a predefined time or by
an action on the lower menu of the page.
It is also possible to stop the programme using the emergency stop bulb
5.4.1
Taring Biofeedback
Taring works automatically. However, it is possible to adjust the parameters calculated by the
machine with the buttons
and
.
Procedure for taring
•
Place the probe or electrodes
•
Start taring
•
Ask the patient to make a sustained contraction (the gauges change automatically), then
release the effort for a few seconds.
•
The BioStim automatically sets the operating range
•
Go to the next page by pressing the arrow (or wait for the end of the taring time)
•
During the exercise, it will still be possible to manually adjust the level of the tare with
the + and - buttons at the top right of the page
It is possible for each channel to enable or disable negative biofeedback, either in the
configuration page or during taring.
If the option is enabled, you can see the work below the base level. This is particularly useful if
you are working on relaxation.
In the + version, it is possible
to adjust during the exercise the
level of negative BFB to be displayed, using the slider in the right panel:
Back to the previous
page
Stopping
the
programme
Pause
Time remaining
before next page
Go to next page
Negative biofeedback
zone
Maximum level
Basic toning
Zero Patients
Zero Biostim
Maximum level
Zero Patients
Zero Biostim
