4
REAR WING INSTALLATION
Vehicle protection
1. Open the trunk lid, and cover the entire trunk lid opening
with a soft cloth for protection.
Rear wing (upper) assembly
1. Temporarily install the foot bracket with the M5 truss
screws, M5 spring washers, and M5 plain washers to the
rear wing (upper).
Trunk lid drilling
1. Cut out the templates.
2. Affix the templates along the edges of the trunk lid and
secure then with masking tape.
3. Tap drill hole marks with a punch in the crosshair marks
on the templates (2 locations each side).
4. Remove the template from the trunk lid.
4
•
The figures show the left side; however, perform
the same procedure for the right side.
Note
•
Reference lines are printed on each template. Be
sure to affix the templates in the specified position.
CAUTION
•
Do not punch the trunk lid hard, otherwise it may be
deformed.
CAUTION
•
There are left and right foot brackets. Be sure to
install each to the correct side.
CAUTION
LH
Template
Reference
lines
M5 truss screws
M5 spring
washers
M5 plain
washers
Foot
bracket
Rear wing
upper
Check
(L) or (R).
