Option 1 - Reinitiate the Remote Start Function
•
If you notice the vehicle did not start and want to reinitiate the remote start sequence, simply push and hold
the START button on the transmitter for one second. You will see the parking lights turn off, then you can
reinitiate the remote start function as normal.
Option 2 - Starting the Vehicle with the Ignition Key
•
If you notice the vehicle did not start and wish to start the vehicle with the ignition key, simply enter the vehicle
as you normally would but press the brake pedal to disengage the remote starter and start the vehicle with
the ignition key as normal.
Using Car Find
When the remote start system is not activated, the unit has a car find feature available. To activate car find,
press and hold the START button on the remote control transmitter for at least 1 second. The vehicle’s horn
will beep and the parking lights will flash 5 times. Press and hold the START button again to repeat.
Car Find Function
66666
Transmitter Programming Button
The programming button is located in the driver’s kick panel and it is
used to enter the program mode and synchronize new transmitters to
the remote start system. The system can handle a maximum of 8
transmitters. If you need extra or replacement transmitters, please
see your dealer.
Note: Programming instructions are included with the transmitter
replacement part. (Part Number: 0000 - 8F - Z02)
