Pre-Heating or Pre-cooling the Interior
Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the system
starts the vehicle, the heater or air-conditioning will activate and heat or cool the interior to your setting.
Using the “Quick-Stop” Feature
If you want to make a short stop and leave your vehicle running (to keep the interior warm or cool), the quick-
stop feature allows you to do this while keeping your vehicle secure and your keys with you.
To engage quick-stop:
1.
Stop the vehicle and place the transmission in PARK.
2.
With your foot off the brake pedal, press the START button on the remote control. The parking lights
will turn on indicating the vehicle is now running via remote start.
3.
Remove the keys from the ignition and exit the vehicle. Press the LOCK button on the FACTORY remote
control to lock the vehicle doors.
4.
When you return to the vehicle, enter the vehicle and disengage the remote start as explained in “Entering
the Vehicle While it is Running via Remote Start”.
Warning: Leaving children or animals unattended in a vehicle while using the remote start function is
dangerous. This could result in someone being badly injured or even killed. They could play with power
windows or other controls.
Service/valet mode should be used when servicing the vehicle or while a valet service is being used to
prevent the system from unexpectedly starting the engine. While in service/valet mode, the remote start
function is temporarily disabled. The system will beep the horn 2 times if an attempt is made to activate the
remote start system.
44444
Using the Remote Control Start Function
