DIP Settings:
DIP Down= ON
DIP UP= OFF
DIP
ON
OFF
Default
1
External RGB connected.
Internal GPS module
UP(OFF)
(when using external
Enabled.
GPS/Android box)
2
External video source 1
External video source 1
UP(OFF)
enabled (DVD/Digital TV etc)
Disabled
3
External video source 2
External video source 2
UP(OFF)
enabled (DVD/Digital TV etc)
Disabled
4
RGB Input Resolutions
RGB Input Resolutions
DOWN(ON)
800*480
480*240 or 400*240
5
Reverse camera installed
Reverse camera not
DOWN(ON)
installed
6
Set On Once for IR
Set off for normal use
UP(OFF)
programming and ON/OFF 5
(touch calibration is for
times for touch panel
DVD/TV for Video1 and
calibration
Video2)
7,8
No Function (Keep UP(OFF) in all cases)
Power Definition for 6PIN power connector between CANBOX and Interface:
YELLOW
12V power supply (Battery)
RED
: ACC =12V when key in ignition state
when=12V the interface works.
BLACK Ground to Chassis.
GREEN
Can box generated reverse trigger signal [when =12V the reverse video is enabled], this wire is automatically
generated by CAN bus.
WHITE:
This wire is the switch signal, when the user presses call off key. Can switch video source.
GRAY
CAN box’s communication data with guideline angle.
