3
Intrusion Sensor
Method of use
Arming and cancelling the intrusion sensor system
Arming and cancelling the intrusion sensor works in conjunction with the vehicle burglar
alarm. For details on the burglar alarm, refer to the vehicle owner's manual.
NOTE
Even with a window or the sunroof* open, the system can be armed, however, leaving
the windows and the sunroof* even partially open can invite theft, and wind blowing into
the vehicle could trigger the alarm.
The intrusion sensor function can also be cancelled.
Cancelling the Intrusion Sensor
To cancel the intrusion sensor, press the intrusion sensor cancel button on the transmitter
(sold separately) within 20 seconds after pressing the lock button.
The hazard warning lights will flash three times.
NOTE
To reactivate the intrusion sensor, turn off the armed theft-deterrent system and then
rearm it.
The intrusion sensor is operational when the theft-deterrent system is armed.
To cancel the intrusion sensor, press the intrusion sensor cancel button each time the
theft-deterrent system is armed.
If the theft deterrent system has been armed while any of the following conditions are
present, cancel the intrusion sensor to prevent the alarm from triggering unnecessarily.
Leaving the vehicle with a movable object, passengers or pets remaining inside.
Leaving an object inside the vehicle that can roll around, such as when the vehicle is
placed on a tilting, unstable surface when being shipped.
Hanging small objects/accessories in the vehicle, hanging clothing on a coat hook, or
placing other items which can move easily inside the vehicle.
Parking in an area where there is strong vibration or loud noise.
When using a high pressure or automatic car wash.
Continuous shock and vibration from hail or thunder and lightning is transmitted to the
vehicle.
Doors are locked with a window or the sunroof* left open.
An accessory heater or device that produces moving air and vibration operates while the
theft deterrent system is armed.
*Some models.
