background image

NOTE

Because the key utilizes low-intensity
radio waves, the Key Removed From
Vehicle Warning may activate if the key is
carried together with a metal object or it
is placed in a poor signal reception area.

Touch Sensor Inoperable Warning
Beep (With the advanced keyless
function)

A warning beep is activated to notify the
driver that the doors are not locked when
all of the following conditions are met:

The ignition is switched OFF.

All the doors and liftgate/trunk lid are
not fully closed.

The lock is operated 3 times within 5
seconds.

Check the ignition and whether the doors
and liftgate/trunk lid are open or closed,
and then operate the lock again.

Key Left-in-luggage Compartment/
Trunk Warning Beep (With the
advanced keyless function)

If the key is left in the luggage
compartment/trunk with all the doors
locked and the liftgate/trunk lid closed, a
beep will be heard outside for about 10
seconds to notify the driver that the key is
in the luggage compartment/trunk. In this
case, take out the key by pressing the
electric liftgate/trunk lid opener and
opening the liftgate/trunk lid. The key
taken out of the luggage compartment/
trunk may not operate because its
functions have been temporarily stopped.
To restore the key's functions, perform the
applicable procedure (page 3-8).

Key Left-in-vehicle Warning Beep
(With the advanced keyless
function)

If all the doors and luggage compartment/
trunk are locked using another key while
the key is left in the cabin, the beep which
sounds outside of the vehicle will be heard
for about 10 seconds to notify the driver
that the key is in the cabin. In this case,
take out the key by opening the door. A
key taken out of the vehicle using this
method may not operate because its
functions have been temporarily stopped.
To restore the key's functions, perform the
applicable procedure (page 3-8).

Low Fuel Warning Beep

When the low fuel warning light flashes, a
warning beep is activated once at the same
time.

Electric Parking Brake (EPB)
Warning Beep

The warning buzzer is activated under the
following conditions:

The vehicle is driven with the parking
brake applied.

The Electric Parking Brake (EPB)
switch is pulled while the vehicle is
driven.

You attempt to start driving the vehicle
while the conditions for releasing the
Electric Parking Brake (EPB)
automatically have not been met.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

7-43

Mazda3_8HE9-EA-18K_Edition1

2018-10-17 19:05:10

Summary of Contents for 3 2019

















































































































































































































































































































































































































































































































































































































Reviews: