Black plate (360,1)
6. Disconnect the bulb from the socket.
7. Install the new bulb in the reverse order
of the removal procedure.
Fog lights
í
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. If you are changing the right low-beam
bulb, start the engine, turn the steering
wheel all the way to the right, and turn
off engine. If you are changing the left
low-beam bulb, turn the steering wheel
to the left.
3. Pull the center of each plastic retainer
and remove the retainers.
Installation
Removal
4. Turn the screw counterclockwise and
remove it, and then partially peel back
the mudguard.
5. Disconnect the connector from the unit
by pressing the tab on the connector
with your finger and pulling the
connector downward.
6-44
Maintenance and Care
í
Some models.
Owner Maintenance
CX-5_8CA5-EA-11L_Edition1 Page360
Monday, December 12 2011 11:32 AM
Form No.8CA5-EA-11L