background image

3

4

To Program the Driver’s Seat Position

    

1

 Park the vehicle.

    

2

   Adjust the seat to the desired position using the slide/tilt and 

recline switches.

    

3

   Push the memory seat SET button followed by one of the programming 

buttons (1-3) until a beep is heard. Programming is now complete. 
Program the remaining two buttons as desired.

 

 

NOTE:

 You can also program a seat position for each advanced key/retractable type 

key used with the vehicle. See Owner’s Manual for programming instructions.

To Move the Seat to a Programmed Position

    

1

 Shift the selector lever to the P position.

    

2

   Push the programming button (1-3) that you selected when 

programming your seat position.

Seats

ELECTRONICALLY OPERATED SEAT W/MEMORY 

Slide/Tilt Switch

Seat can be moved back 
and forth, raised, lowered,  
or tilted with this control.

Lumbar Switch

Push forward or backward to increase or 
decrease lumbar support.

Recline Switch

Push forward or backward 
to adjust seatback angle.

Memory Seat Switch

  

1

 Open liftgate.

  

2

   Lower head restraints.

      

3

     Pull each strap on the rear of 

the seat while pushing the left  

and right seat forward to lay flat.

To Return to the Original Position

Pull the strap to return the seatback to the original position.

THIRD-ROW SEAT ACCESS

 •  Pull the third-row seat access lever on the  

side of the second-row seatback to fold  

and slide the seat forward to access  

third-row seating. 

 • Return the second-row seatback to the 

normal upright position by pulling up on  

the seatback until it locks into place. 

 •  Slide the second-row seat forward or back  

for proper legroom using the lever under  

the front of the seat. 

SECOND ROW SEATBACK RECLINE

To recline the seatback, lean forward slightly while folding lever. Then lean 

back to the desired position and release the lever.

FOLDING THE SECOND-ROW SEATS

    

1

 Unfasten the lap portion of the center-rear seat belt. 

    

2

 Slide seat all the way back toward rear of vehicle. 

    

3

 Lower head restraints. 

    

4

 Pull the seatback folding lever and fold the seatback forward.

SPLIT FOLDING THIRD-ROW SEAT

To create a flat luggage compartment  

space, fold the seatbacks forward.

Third-row seat 

access lever 

Seatback folding 

lever

Straps

C

   

   

 P

Summary of Contents for 2010 CX-9

















Reviews: