Audio Controls With Navigation
21
22
1.
Push
AD
.
2.
Select the
CD
on-screen button.
3.
Wait for the screen to lower.
4.
Insert the CD after “IN” is displayed on
the Information Display. The CD will begin
playing after the screen closes.
TO LOAD/PLAY A CD
POWER ON
Push the POWER/VOLUME button to
turn the radio on.
MEDIA SELECTION
Push the SOURCE button to select
the appropriate on-screen button:
Radio:
Select FM or AM button
for FM1, FM2, or AM band. The
selected band will be indicated in
the Information Display.
DISC:
Select for CD player.
Satellite Radio:
Select SAT for
SIRIUS XM Radio
®
. If your vehicle
is equipped with SIRIUS XM Radio
®
(satellite radio antenna on roof or trunk
lid), your new Mazda includes a free
six-month introductory subscription.
Call 888-539-7474 to activate! See the
Owner’s Manual for details.
AUX 1:
Select to switch to AUX
jack input.
NOTE:
AUX 1 illuminates only if external
device is connected to AUX 1 jack.
AUX 2:
Select to switch to Rear Seat
Entertainment System (RSES).
NOTE:
AUX 2 illuminates only if RSES
is powered on.
iPod:
Select to play iPod.
NOTE:
iPod illuminates only if dealer
installed iPod integration kit and device
is connected.
BT-Audio:
Select for Bluetooth
®
Audio.
TUNING
The radio has the following
tuning controls:
•
Manual:
Turn the TUNE/AUDIO dial
to manually change the frequency.
•
Seek/Track:
Push and hold
the SEEK/TRACK buttons
to automatically seek a higher
or lower frequency or track,
depending on media selected.
NOTE:
If you continue to push and hold
the buttons, the frequency will continue
changing without stopping until released.
•
Scan:
Push the SCAN button
to automatically sample strong
stations for seconds each. Push
again to cancel.
•
Preset Channel:
Can be used
to store 8 AM, 16 FM and
18 SIRIUS XM Radio
®
stations.
1
Push the SOURCE button.
2
Select AM/FM or SAT.
3
For FM, select FM1/2
button, for SAT, select
PRESETS button.
4
Tune to the desired station
using the SEEK/TRACK
button or by turning the
TUNE/AUDIO dial.
5
Select and hold any channel
preset on-screen button for
about two seconds until a
beep is heard.
•
Repeat to store other stations.
INFO
Push to display the trip
computer in place of the clock
on the information display. The
trip computer can display:
• Current fuel economy
• Average fuel economy
• Approximate distance you
can travel on the available
fuel in your gas tank.
• Average vehicle speed.
• When average fuel economy
or average velocity is
displayed, push INFO
button more than 1.5
seconds to reset.
1.
Push the
MENU
button.
2.
Select the Set Clock tab.
3.
Scroll to “Display Type” and select; then
select a 24-hour or a 12-hour display.
4.
Use the
+
hour and
-
hour tabs to enter
the correct hour.
5.
Use the +1 min (minutes) and -1 min
to move minutes ahead or back.
NOTE:
• When Auto Time Zone is switched ON, the
time cannot be adjusted manually.
• When Auto Time Zone is switched OFF,
the daylight saving time on-screen button
cannot be operated.
SETTING YOUR CLOCK
•
Auto Memory Tuning:
Select and hold the AUTO-M on-screen
button until beep is heard to store
an additional 8 stations on each FM
and AM band without disturbing the
previously stored stations. Refer to the
Owner’s Manual for complete details.
BLUETOOTH
®
AUDIO
Bluetooth
®
enabled phones and audio
players provide an opportunity to play
music through the audio system with
no wires attached, however, there are
some limitations:
• During playback, the song title or artist
will not be shown on the vehicle’s
information display. (This may vary
due to the specification of your phone
or player (AVRCP 1.3 required). To
obtain further information, please refer
to the Owner’s Manual). This is not a
problem with the vehicle, phone, or
player. The current audio profile does
not send this information.
• Not all controls on the phone or player
will be active when paired to the vehicle.
• Wi-Fi signal strength can affect audio
streaming.
• Sound quality of streaming audio varies
depending on the device.
BLUETOOTH
®
HANDS-FREE
(P. 25)
/
AUDIO
(PP. 17-22)
C
P
