Mazda 2005 Tribute Owner'S Manual Download Page 41

Page: 41 / 256

Replacing license plate lamp bulbs

1. Push the license plate lamp

assembly to the right and
remove the assembly (located
above the license plate) from
the liftgate.

2. Remove bulb socket from lamp

assembly by turning
counterclockwise.

3. Pull the bulb out from the

socket and push in the new
bulb.

4. Install the bulb socket in lamp assembly turning it clockwise,

5. Install the lamp assembly on liftgate.

Replacing high-mount brake lamp bulbs

For bulb replacement, see an authorized Mazda dealer.

2005 Mazda Tribute

(j14)

Owners Guide (post-2002-fmt)
USA English

(fus)

Lights

Summary of Contents for 2005 Tribute

































































































































































































































































Search results

Summary of Contents for 2005 Tribute

Reviews:

Related manuals for 2005 Tribute

Brands by name

Popular brands

Mazda 2005 Tribute, Owner'S Manual

Search results

Summary of Contents for 2005 Tribute

Reviews:

Related manuals for 2005 Tribute

Brands by name

Popular brands