Mazda 2005 MPV Owner'S Manual Download Page 199

Page: 199 / 340

Black plate (199,1)

NOTE

When the clock button (

) is

released, the seconds are reset to

“

”

If the power supply to the unit is
interrupted (if the fuse blows or the
vehicle's battery is disconnected), the
clock will need to be reset.

Changing the display mode

The display on the unit can be changed by
pressing the clock button (

). This

alternates the display between clock mode
and normal mode. When the clock mode
has been selected, the time will be
displayed.

NOTE

The displays when using the audio
differ in clock mode and normal mode.

Interior Comfort

Audio System

6-25

Mazda MPV_8T51-EC-04G_Edition3 Page199
Friday, December 17 2004 11:12 AM

Form No.8T51-EC-04G

Summary of Contents for 2005 MPV





















































































































































































































































































































































Search results

Summary of Contents for 2005 MPV

Reviews:

Mazda 2005 MPV, Owner'S Manual, Page: 199 / 340

Search results

Summary of Contents for 2005 MPV

Reviews: