Mazda 2005 MPV Owner'S Manual Download Page 242

Page: 242 / 340

Black plate (242,1)

Removing a Flat Tire

1. If your vehicle is equipped with a

wheel cover, pry off the wheel cover
with the beveled end of the jack lever.

NOTE

Force the end of the jack lever firmly
between wheel and cover, or removal
will be difficult.

CAUTION

Align the notch on the wheel cover
with the valve stem when installing it.

Tire valve

Notch

Damage could occur during installation
if the wheel cover is not properly
aligned.

2. Loosen the lug nuts by turning them

counterclockwise one turn each, but
don't remove any lug nuts until the tire
has been raised off the ground.

3. Place the jack under the jacking

position closest to the tire being
changed.

Jacking position

7-10

In Case of an Emergency

Flat Tire

Mazda MPV_8T51-EC-04G_Edition3 Page242
Friday, December 17 2004 11:12 AM

Form No.8T51-EC-04G

Summary of Contents for 2005 MPV





















































































































































































































































































































































Search results

Summary of Contents for 2005 MPV

Reviews:

Related manuals for 2005 MPV

Brands by name

Popular brands

Mazda 2005 MPV, Owner'S Manual

Search results

Summary of Contents for 2005 MPV

Reviews:

Related manuals for 2005 MPV

Brands by name

Popular brands