Mazda 2005 MPV Owner'S Manual Download Page 255

Page: 255 / 340

Black plate (255,1)

Towing Description

We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.

Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.

A towed vehicle usually should have its
front wheels off the ground. If excessive
damage or other conditions prevent this,
use wheel dollies.

Wheel dollies

When towing with the rear wheels on the
ground, release the parking brake.

CAUTION

Don't tow the vehicle pointed backward
with driving wheels on the ground. This
may cause internal damage to the
transaxle.

CAUTION

Don't tow with sling-type equipment.
This could damage your vehicle. Use
wheel-lift or flatbed equipment.

In Case of an Emergency

Emergency Towing

7-23

Mazda MPV_8T51-EC-04G_Edition3 Page255
Friday, December 17 2004 11:12 AM

Form No.8T51-EC-04G

Summary of Contents for 2005 MPV





















































































































































































































































































































































Search results

Summary of Contents for 2005 MPV

Reviews:

Related manuals for 2005 MPV

Brands by name

Popular brands

Mazda 2005 MPV, Owner'S Manual

Search results

Summary of Contents for 2005 MPV

Reviews:

Related manuals for 2005 MPV

Brands by name

Popular brands