Page 7 of 10
5
Cross
Member
5. While removing all slack, use a large tie wrap
to secure the harness to the hitch attachment
bracket (d). Tighten the tie wrap and trim the
tail using wire cutters.
6. Remove all the slack in the harness near the wire attachment point near the grommet.
This is located on the rear side of the bumper defl ector (e). Use a large tie wrap to
secure the harness to the attachment point. Remove all slack, tighten the tie wrap and
trim the tie wrap tail using wire cutters.
(c)
E
FINISHING STEPS
(d)
Attachment
Bolt
5-6
Grommet
(e)
(d)
4-Flat
Trailer Harness
Tie Wrap
Tie Wrap
Tie Wrap
