Mazda 0000 8C Z01, Installation Instructions Manual

Page: 10 / 10

Page: 10 of 10 11/5/2012
BASIC INSTALLATION TROUBLE-SHOOTING
Verify the following:
1. B+ harness wire (pin 10 at the mirror connector) is rec12V
with ignition OFF and ON.
2. Switched harness wire (pin 6 at the mirror connector) is receiving
+12V with ignition ON and 0V with ignition OFF.
3. Ground wire (pin 3 at the mirror connector) is properly grounded.
4. EC harness is fully inserted into mirror.
5. Ensure jumper connectors are properly installed.
6. EC harness is not pinched, cut or damaged.
P1
NO. GAGE COLOR FUNCTION
1 20 AWG BLACK -
2
20 AWG
BLACK - 3
20 AWG BLACK - 4
20 AWG
BLACK -
5
20 AWG BLACK -
22 AWG
RED IGNITION 6
20 AWG BLACK - 7
20 AWG
BLACK -
8
20 AWG
BLACK -
22 AWG
BATTERY
9 20 AWG BLACK -
10
20 AWG
BLACK -
11 20 AWG BLACK -
12
20 AWG
BLACK -
22 AWG BLACK GROUND
P2
NO. GAGE COLOR FUNCTION
1 20 AWG BLACK -
2
20 AWG BLACK -
3
20 AWG BLACK -
4
20 AWG BLACK -
5
20 AWG BLACK -
6 20 AWG BLACK -
7
20 AWG BLACK -
8 20 AWG BLACK -
9
20 AWG BLACK -
10 20 AWG BLACK -
11
20 AWG BLACK -
12
20 AWG BLACK -
P3
NO. GAGE COLOR FUNCTION
1
2
3 22 AWG
4
5
6
IGNITION
7
12
22 AWG BLACK GROUND
RED