Mazda CX-7
－
23
INSTALLING THE HARNESS (H5)
Installation of SIRIUS and iPod integration module
1. Cut the harness tube of the audio 24-pin connector as
shown in the figure.
2. Cut the harness tube of the vehicle wiring harness as
shown in the figure.
3. Bend back the harness tube, move the AUX or Bluetooth
H/F connector harness, and change the branch point.
4. Wrap the cut harness tube and the vehicle wiring harness
with vinyl tape.
5. Wrap the cut harness tube and the AUX or Bluetooth H/F
connector harness with vinyl tape.
6. Connect the harness (H5) to the DLP unit.
(See step 6 on page 16 as to the installation position.)
7. Bundle the harness (H5) and antenna cable using a tie
wrap (large) as shown in the figure.
10
Vehicle front
Harness tube
(Audio 24-pin connector)
70 {2.75}
mm {in}
•
When cutting the harness tube, be careful not to
damage the wiring harness.
If not, it may cause a short, accident, or fire.
CAUTION
•
Do not apply excessive force to the wiring harness as
it could cause an open circuit.
CAUTION
•
When cutting the harness tube, be careful not to
damage the wiring harness.
If not, it may cause a short, accident, or fire.
CAUTION
Vehicle front
Vehicle wiring harness
50 {1.96}
mm {in}
Harness tube
(Vehicle wiring
harness)
Vinyl tape
Vehicle wiring
harness
AUX or Bluetooth H/F
16 pin connector harness
Harness (H5)
Vehicle front
Antenna cable
Tie wrap (large)
DLP unit
ⓐ
