Mazda CX-7
－
15
INSTALLING DLP UNIT
1. Remove the bushes (4 locations), brackets (2 locations),
washers (4 locations), and screws (4 locations) from the
DLP unit.
2. Affix the pad protectors to the DLP unit as shown in the
figure.
3. Affix pad protectors to the DLP unit as shown in the figure.
4. Adhere double-sided adhesive tapes to the top of the pad
protectors.
6
•
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
Double-sided adhesive tapes
Pad protectors
DLP unit
Pad protectors
DLP unit
Pad protector
Pad protectors
DLP unit
DLP unit
Bracket
Bush
Washer
Screw
Bracket
Bush
Washer
Screw
•
The brackets are not used with the installation of this
accessory.
Note
