MAZDA5
㧙
28
8. Route a tie wrap (small) to a tie wrap (large) used for
securing the DLP unit, route the harness (H5) as shown
in the figure, and secure it.
9. Branch connect the CAN (+) wires (for Sirius and for
iPod) to the information display 12-pin connector
(terminal J) using the electro taps.
10. Branch connect the CAN (-) wires (for Sirius and for
iPod) to the information display 12-pin connector
(terminal L) using the electro taps.
Information display 12 pin connector
(Vehicle wire)
Kit
㩷
wire
㩷
Terminal J
CAN (+)
㩷
Terminal L
CAN (-)
㩷
11. Wrap the electro taps and vehicle wiring harness
together using urethane.
12. Secure the harness (H5) CAN (+, -) wires (for Sirius and
for iPod) to the dashboard with pad protector.
13. Secure the harness (H5) CAN (+, -) wires (for Sirius and
for iPod) to the vehicle wiring harness with tie wrap
(small).
14. Connect the harness (H5) 16 pin connector to the AUX,
Bluetooth H/F connector.
15. Affix the harness (H5) 16 pin connector to the dashboard
member using a tie wrap (large).
x
When reinstalling the audio unit, always secure it
using a tie wrap (small). Otherwise, the harness (H5)
may get caught.
㩷
CAUTION
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
Urethane
Tie wrap (small)
Terminal L: CAN (-)
Kit wire: CAN (-)
Terminal J: CAN (+)
Kit wire: CAN (+)
J
L
[Information display 12 pin connector]
(View from wire side of connector)
Vehicle wiring
harness
Electro-taps
Harness (H5)
(CAN (+, -) wires)
Vehicle front
Pad protector
Harness (H5)
Tie wrap (large)
Harness (H5)
(+B, ACC wires)
Tie wrap (small)
Vehicle front
Harness (H5)
(16 pin connector)
Dashboard member
Vehicle front
AUX, Bluetooth H/F
Tie wrap (large)
