background image

2

Robotic Pool Cleaner  Mass 11

 

|

 

User Instructions

Robotic Pool Cleaner Mass 11 

 

User Instructions

1.  INTRODUCTION

Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient  

and cost-effective pool cleaning. Its reliable filtration in all pool conditions and active brushing,  

enhance pool hygiene.
Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologys, long-lasting 
performance  and easy maintenance. You and your family will be free to enjoy your swim with full 

confidence that your pool is completely clean.

2.  SPECIFICATIONS

Motor protection: IP 68
Minimum  depth:  0.80m / 2.6ft
Maximum  depth:  5m / 16.4ft

3.  WARNINGS AND CAUTIONS

3.1  Warnings

• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an 

earth leakage interrupter (ELI)

• Keep the power supply out of standing water

• Position the power supply at least 3m/10ft away from the edge of the pool

• Do not enter the pool while the Pool Cleaner is working
• Unplug the power supply before servicing

3.2  Cautions

Use the Pool Cleaner in the following water conditions only: 

Chlorine

Maximum 4 ppm

pH

7.0-7.8

Temperature

6-34°C / 43-93°F

NaCl

Maximum 5000 ppm

 

CAUTION

Digital Power supply        
Input:    100-130 AC Volts / 200-230 AC Volts 
 

 50-60 Hertz 

Output:   <30  VDC 
 

 IP 54

Summary of Contents for Dolphin Nautilus CC














Reviews: