2
Pliers or slip-joint pliers
Utility knife
1/4" hex-head ratchet or
open-end wrench
Towel
9/16" open-end wrench
Sponge
Bucket
Level
INSTALLATION REQUIREMENTS
loCatIon RequIRementS
note
: If the washer/dryer and pedestal assembly are located
in a garage, 8
"
(203 mm) must be added under the pedestal so
that the washer/dryer is 18
"
(458 mm) above the garage floor.
toolS and PaRtS
Gather the required tools and parts before starting installation.
tools needed:
additional items needed:
Four #12 x 5/8
"
hex-head
sheet metal screws
(in parts bag)
Two retainer clips
(in parts bag)
Parts supplied: