Disassembly Procedures
!
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless test
procedures require power to be connected. Discharge capacitor through a resistor before attempting to service.
Ensure all ground wires are connected before certifying unit as repaired and/or operational.
©2004 Maytag Appliances Company
16022983 Rev. 0
9
Selection Buttons
1. Grasp the bottom of the selection button and pull
toward you.
2. While the selection button is pulled out, pull down on
the selection button firmly to release selection button
from cabinet.
3. Reverse procedure to reassemble.
Circulating Fan
1. Remove dispenser assembly (see dispenser
assembly removal).
2. Remove circulating fan screws and unplug from
cabinet PCB.
3. Remove circulating fan.
Note: Circulating fan must be installed so the airflow
draws air from the dispenser assembly.
4. Reverse procedure to reassemble.
Ballast and Light Bulb
1. Remove top cover from cabinet by lifting it off of unit.
2. Remove plexiglass cover by lifting it from the slot at
the front of the cabinet to expose ballast or light bulb.
3. Reverse procedure to reassemble.
Summary of Contents for Skybox MBS1976AAB
Page 11: ...A 1 Appendix A...
Page 28: ...B 1 Appendix B...
