11
ICE DISPENSER
OPERATION
To dispense ice:
➢
Select
CUBE
or
CRUSH
ice mode by
pushing button on dispenser control
panel. A green indicator light above
button shows mode selection.
➢
Press container
against dispenser
pad. When dispens-
ing crushed ice, hold
container as close to
chute as possible to
reduce spraying.
Selection mode
may not be changed while ice dis-
penser is in operation.
NOTE:
If dispenser is active for more
than 3 minutes, an automatic lock out
sensor will shut down power to dis-
penser area. See
Dispenser Lock
for
unlocking information.
DISPENSER LOCK
(SOME MODELS)
This feature prevents ice or water from
being dispensed.
To lock dispenser:
➢
Press and hold
LOCK/UNLOCK
button for 3 seconds. A green indica-
tor light above button confirms dis-
penser is locked.
To unlock dispenser:
➢
Hold
LOCK/UNLOCK
button for 3
seconds. Green indicator light above
button will go out.
FILTER STATUS
INDICATOR LIGHT
(SOME MODELS)
The filter status indicator light
serves as a reminder to replace the
water filter. A green light indicates that
the filter is in good condition. A red light
indicates the filter should be changed.
Once light turns red, it will remain red
until function is reset.
To reset indicator:
➢
Press and hold both
LOCK/UNLOCK
and
WATER
buttons simultaneously
for 4 seconds. The green filter status
indicator light will flash 3 times when
the function has successfully reset.
AUTO LIGHT
(SOME MODELS)
The Auto Light function
offers the ability to activate the
dispenser light at half-power when the
Light Sensor
detects that the light lev-
els in room are low.
To activate Auto Light:
➢
Press
ON/OFF
button located on
control panel. A green indicator light
above button displays to show that
sensor is active.
To deactivate Auto Light:
➢
Press
ON/OFF
button. Green indica-
tor light will go out.
NOTE:
Dispenser light will operate
whether or not Auto Light is selected.
SABBATH MODE
(SOME MODELS)
This mode is intended to
deactivate power to the LED
and dispenser lights, while
allowing the controls to remain opera-
tional.
To activate Sabbath Mode:
➢
Press and hold both
LOCK/UNLOCK
and
ON/OFF
buttons simultaneously
for 3 to 4 seconds. After 3 to 4 sec-
onds, the LED and dispenser lights
will turn off.
Dispenser light will not
activate during dispensing while in
this mode.
To deactivate Sabbath Mode:
➢
Press and hold both
LOCK/UNLOCK
and
ON/OFF
buttons simultaneously
for 3 to 4 seconds. After 3 to 4 sec-
onds, the LED and dispenser lights
will activate.
NOTE:
In the event that power is inter-
rupted while the Sabbath Mode is active,
the control will remain in Sabbath Mode
when power returns.
control features
NOTE:
These directions pertain to 5-button controls only. If your unit has LCD controls, please refer to the information booklet
located in your literature packet.
D
ISPENSER FEATURES
(SELECT MODELS), cont.
Summary of Contents for Performa Series
