Maytag MLG33PDAWW Installation & Operator'S Manual Download Page 2

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas.  These instructions
must be posted in a prominent location near the dryer.

FOR YOUR SAFETY

Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful.  The manufacturer
reserves the right to make changes from time to time, without notice or obligation, in prices, specifications,
colors, and material, and to change or discontinue models.  The illustrations included in this manual may not
depict your particular dryer exactly.

IMPORTANT

For your convenience, log the following information:

  DATE OF PURCHASE _________________________________________________________ MODEL NO. _________________

  DEALER’S NAME _________________________________________________________________________________________

  Serial Number(s) ________________________________________________________________________________________

_______________________________________________________________________________________________________

_______________________________________________________________________________________________________

For replacement parts, contact the dealer from which the dryer was purchased or contact:

Maytag Co.

403 West Fourth Street North, Newton, Iowa 50208

Telephone: (641) 787-7000

Retain This Manual in a Safe Place for Future Reference

This product embodies advanced concepts in engineering, design, and safety.  If this product is properly
maintained, it will provide many years of safe, efficient, and trouble free operation.

Only qualified technicians should service this equipment

.

OBSERVE ALL SAFETY PRECAUTIONS

 displayed on the equipment or specified in the installation

manual included with the dryer.

The following “

FOR YOUR SAFETY

” caution must be posted near the dryer in a prominent location.

MLG33

Summary of Contents for MLG33PDAWW





























Reviews: