Maytag MGS5752BD, Service, Page: 38 / 55

B – 2 16026293
©2005 Maytag Services
Use Information, Model AGS1740BD*
7
Oven Cooking
Control Panel
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes model specific features. (Styling may vary depending on model.)
Using the Touchpads
• Press the desired pad.
• Press the
▲
or
▼
pad to enter time or temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
A Broil Use for broiling and top browning.
B Bake Use for baking and roasting.
C More (
▲
) or Enters or changes time, oven
Less (
▼
) temperature. Sets HI or LO broil.
D Timer Sets Timer.
E Cook & Hold Bakes for a preset time, then holds food
warm for 1 hour.
F Delay Programs the oven to start baking at
a later time.
G Clock Use to set time-of-day clock.
H Keep Warm Use to keep cooked food warm in oven.
I Cancel Cancels all operations except Timer
and Clock.
A B C D
E F G H I
Note: Four seconds after pressing the
▲
or
▼
pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the
▲
or
▼
pad, the function will be canceled and the
display will return to the previous display.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to
24-hour format:
1. Press and hold the Cancel and Delay
pads for three seconds.
2. Press
▲
or
▼
pad to select 12 or
24 hour.
3. Set the time of day following the directions below.
To set the Clock:
1. Press the Clock pad.
• Colon flashes in the display.
2. Press
▲
or
▼
pad to set the time of day.
• Colon continues flashing.
3. Press the Clock pad again or wait four
seconds. The colon stops flashing.
When electrical power is supplied or after a power interrup-
tion, the last clock time before power was interrupted will
flash.
To recall the time of day when another time function is
showing, press the
Clock pad.
Clock time cannot be changed when the oven has been
programmed for Delay Cook or Clean, or Cook & Hold.