5
Installation clearances
The location must be large enough to allow the dryer door
to open fully.
Dryer Dimensions
29"
(7
3
7 mm)
22
1
/
4
"
(565 mm)
29
1
/
4
"
(74
3
mm)
4
3
1
/
2
"
(1105 mm)
NOTE:
Most installations require a minimum 5" (127 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements.”
Installation spacing for recesse
d
area or closet installation
The following spacing dimensions are recommended for this dryer.
This dryer has been tested for spacing of 0" (0 mm) clearance on
the sides and rear. Recommended spacing should be considered
for the following reasons:
■
Additional spacing should be considered for ease of installation
and servicing.
■
Additional clearances might be required for wall, door, and floor
moldings.
■
Additional spacing should be considered on all sides of the dryer
to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation openings
in the top and bottom of the door are required. Louvered doors
with equivalent ventilation openings are acceptable.
■
Companion appliance spacing should also be considered.
14" máx.*
(
3
56 mm)
29"
(7
3
7 mm)
5"
(127 mm)
1"
(25 mm)
1"
(25 mm)
18"*
(457 mm)
3
"*
(76 mm)
3
"*
(76 mm)
29
1
/
4
"
(74
3
mm)
48"
2
*
(
3
10 cm
2
)
24"
2
*
(155 cm
2
)
Recessed
area
Side view- closet
or confined area
Closet door
with vents
Mo
b
ile home - A
dd
itional installation requirements
This dryer is suitable for mobile home installations. The installation
must conform to the Manufactured Home Construction and Safety
Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard
for Mobile Home Construction and Safety, Title 24, HUD Part 280)
or Standard CAN/CSA-Z240 MH.
Mo
b
ile home installations require:
All Dryers
■
Metal exhaust system hardware, which is available for purchase
from your dealer.
■
Special provisions must be made in mobile homes to introduce
outside air into dryer. The opening (such as a nearby window)
should be at least twice as large as the dryer exhaust opening.
For gas
d
ryers
■
Mobile Home Installation Kit Part Number 346764. See “Tools
and Parts” section for information on ordering.
