9
If the “low” flame needs to be adjusted:
This cooktop is shipped from the factory with low and high flame
settings adjusted for use with Natural gas.
To set for use with LP, the flame can be adjusted using the
adjustment screw located underneath the control knob.
1. Remove the control knob from valve stem.
2. Remove rubber grommet.
3. Use a small flat-blade screwdriver to turn the adjustment
screw clockwise until tight. Do not overtighten.
4. Replace rubber grommet and control knob.
5. Repeat for remaining burners.
A. Adjustment screw
B. Knob hole (knob removed)
C. Control knob
A
B
C
Summary of Contents for MGC7430W
Page 19: ...19 Notes...
