background image

Service Specifications

 

June 2005 

 

16026365 

© 2005 Maytag Services

 

7

!

WARNING

To avoid risk of electrical shock that can cause death or severe personal injury, disconnect unit from power before 

servicing unless tests require power. Discharge capacitors through a 10,000-ohm resistor before handling. Wires 

removed during disassembly must be replaced on correct terminals to ensure proper grounding and polarization. 

Service Test – 201 Mullion Heater Override (if equipped) 

 

Press the Refrigerator Up Keypad

 

 

or Refrigerator Down Keypad

 

 

 

to change Mullion Heater from 

cycling on with compressor (Off position) to 100% operation (On Position). 

Service Test – 202 Default Defrost Operation 

 

Press the Refrigerator Up Keypad

 

 

or Refrigerator Down Keypad

 

 

 

to change Defrost Operation from 

normal adaptive defrost (Off position) to minimum time between defrosts (On position). 

Service Test – 203 Show Temperature Set points 

 

Press the Refrigerator Up Keypad

 

 

or Refrigerator Down Keypad

 

 

 

to change from showing actual 

temperature (Off position) showing temperature set points only (On position). 

Service Test – 211 Fresh Food Temperature Adjustment 

 

Press the Refrigerator Up Keypad

 

 

or Down Keypad

 

 

 

to change calibration of Fresh Food 

Temperature plus or minus in 1°F increments up to 

±

 

6°F. 

NOTE: 

Temperature will read in Fahrenheit regardless of what current temperature scale is being used. 

Service Test – 212 Freezer Temperature Adjustment 

 

Press the Refrigerator Up Keypad

 

 

or Down Keypad

 

 

 

to change calibration of Freezer Temperature 

plus or minus 1°F in increments up to 

±

 

6°F. 

NOTE: 

Temperature will read in Fahrenheit regardless of what current temperature scale is being used. 

Service Test – 221 Reset Default Settings 

 

Press the Refrigerator Up Keypad

 

 

 

and Down Keypad 

 

 

to force to dEF (default factory settings).

Summary of Contents for MFD 2561HEB









Reviews: