28
Maytag Co.
113395 - 9
6. Each dryer
should be
operated through one complete cycle to ensure that no further adjustments are
necessary and that
ALL
components are functioning properly.
7. Make a complete operational check of
ALL
operating controls.
a. Microprocessor Controller (Computer) Programs and Selections:
Each microprocessor controller (computer) has been preprogrammed by the factory with the most
commonly used parameter (program) selections. If computer program changes are required, refer to
the computer programming manual, which was shipped with the dryer.
b. Dual Timer Dryer Models Check:
1) Heating Timer
2) Cool Down Timer
3) Temperature Selection Functions
J. SHUTDOWN INSTRUCTIONS
If the dryer is to be shutdown (taken out of service) for a period of time, the following
must be
performed:
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the gas supply:
a.
SHUT OFF external gas supply shutoff valve
.
b.
SHUT OFF internal gas supply shutoff valve located in the gas valve burner area
.
K. OPERATING INSTRUCTIONS
NOTE:
Before attempting to start the dryer make sure that the main door is closed and the lint drawer
is securely in place.
1. To start the dryer:
a. Microprocessor Controller (Computer) Dryers (refer to user’s manual included with dryer).
b. Dual Timer Dryer Models:
1) Select drying time and cool down time desired.
a) Turn heat timer clockwise (CW) to desired time (i.e., 1 minute to 60 minutes).
b) Turn cool down timer clockwise (CW) to desired time (i.e., 0 minutes to 15 minutes).
2) Select drying temperature.
3) Push “Start” button.
Dryer will now start.
4) To stop dryer, open the main door.
Summary of Contents for MDG-120PHV
Page 46: ...Part No 113395 9 03 26 15 ...
