Maytag Commercial MYR20 Installation Instructions Manual Download Page 17

17

The cost of repair or replacement under these excluded circumstances 

shall be borne by the customer.

1.

All other costs including labor, transportation, shipping, or custom duties

for covered parts.

2.

Factory specified replacement parts if this commercial appliance is

used for other than normal, commercial use or when it is used in a manner

that is inconsistent to published user or operator instructions and/or

installation instructions.

3.

Service calls to correct the installation of your commercial appliance,

to instruct you on how to use your commercial appliance, to replace

or repair house fuses, or to correct external wiring or plumbing.

4.

Service calls to repair or replace appliance light bulbs, air filters, or water

filters. Consumable parts are excluded from warranty coverage.

5.

Damage resulting from improper handling of product during delivery, theft,

accident, alteration, misuse, abuse, fire, flood, acts of God, improper

installation, installation not in accordance with local electrical or plumbing

codes, or use of products not approved by Maytag.

6.

Pick up and delivery. This commercial appliance is designed to be

repaired on location.

7.

Repairs to parts or systems resulting from unauthorized modifications

made to the commercial appliance.

8.

The removal and reinstallation of your commercial appliance if it is

installed in an inaccessible location or is not installed in accordance

with published installation instructions.

9.

Damage resulting from exposure to chemicals.

10.

Changes to the building, room, or location needed in order to make the

commercial appliance operate correctly.

11.

Factory specified replacement parts on commercial appliances with

original model/serial numbers that have been removed, altered, or cannot

be easily determined.

12.

Discoloration, rust, or oxidation of stainless steel surfaces.

13.

Factory specified replacement parts as a result of incorrect diagnosis

or repair by an “unauthorized” service company.

14.

Replacement parts during the sixth through tenth years from the date of

original purchase where the commercial appliance is installed, operated

and maintained in a setting other than a vended and/or multi-housing

environment.

15.

Replacement parts during the sixth through tenth years from the

date of original purchase where the defective part is not preventing the

functioning of the product.




YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS 

LIMITED WARRANTY SHALL BE PART REPLACEMENT AS 

PROVIDED HEREIN. Maytag recommends that you use an 

under this warranty to provide additional replacement parts as 

service company. 

warranty is valid only when the commercial appliance is used 

in the country in which it was purchased. This limited 

warranty is effective from the date of the original consumer 

service under this limited warranty.

FIVE YEAR LIMITED WARRANTY  

(PARTS ONLY — LABOR NOT INCLUDED)

maintained according to the instructions attached to or 

replacement parts to correct defects in materials or 

was purchased. This limited warranty does not include labor. 

SIXTH THROUGH TENTH YEAR LIMITED WARRANTY 

(CERTAIN COMPONENT PARTS ONLY –  

LABOR NOT INCLUDED)

specified replacement parts for the following components to 

when this commercial appliance was purchased. This is a 

does not include labor. 

DISCLAIMER OF IMPLIED WARRANTIES

T

locations do not allow 

.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

locations

.

0 /1

TEN YEAR LIMITED WARRANTY

WHAT IS COVERED

WHAT IS NOT COVERED

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

a longer or more comprehensive warranty than the limited warranty that comes with this 

service plan. The benefits to you given by this warranty are in 

addition to other rights and remedies available to you under law in relation to the goods or services to which this warranty relates. Please 

contact Maytag for further information on warranty terms.

For written correspondence:

Maytag   Commercial Laundry

®

 Service Department

2000 N M 63

Benton Harbor, Michigan 49022-2632 USA

IF YOU NEED SERVICE:

Contact your authorized Maytag   Commercial Laundry distributor. 

To locate your authorized Maytag   Commercial Laundry distributor, 

visit 

www.maytagcommerciallaundry.com

.

LIMITED 

MYS20, MYS30, MYS40, MYS55, MYS65

MYR20, MYR25, MYR30, MYR40, MYR55, MYR65

Summary of Contents for MYR20

























Reviews: