7
Electrical Requirements
■
A 220–240 V, 60 Hz., fused electrical supply is required.
A time-delay 10–16 A fuse or circuit breaker is
recommended.
■
This washer is equipped with a power supply cord having
a 3 prong earthed plug.
■
To minimize possible shock hazard, the cord must be
plugged into a mating, 3 prong, earthing-type outlet, earthed
in accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly earthed
outlet installed by a qualified electrician.
■
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that
the earth path is adequate.
■
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent, or a qualified person
to avoid a hazard.
■
Do not earth to a gas pipe.
■
Check with a qualified electrician if you are not sure
the washer is properly earthed.
■
Do not have a fuse in the neutral or earth circuit.
■
Philippines: Outlet must comply with Philippine National
Standard PNS 1572:1997 Annex A, 250V, 10/15A, 2-pole,
3-wire, grounding receptacle.
EARTHING INSTRUCTIONS
This washer must be earthed. In the event of a malfunction
or breakdown, earthing will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-earthing conductor and an earthing plug. The
plug must be plugged into an appropriate outlet that is
properly installed and earthed in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-
earthing conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly earthed.
Do not modify the plug provided with the appliance – if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
NOTE:
Electrical safety standards: The manufacturer has
chosen compliance with IEC/EN.60335 standards as the most
appropriate for this product.
■
Sound Pressure Level, Lpa: 58 dbA (uncertainty,
Kpa: +/-3.6 dbA)
Dangerous Voltage
Summary of Contents for MHN33PD
Page 19: ...19 NOTES ...
