background image

18

MAYTAG  COMMERCIAL LAUNDRY LIMITED WARRANTY 

MHN33PD, MHN33PN, MHN33PR

The cost of repair or replacement under these excluded circumstances 

shall be borne by the customer.

1. All other costs including labor, transportation, shipping, or custom duties

for covered parts.

2. Factory specified replacement parts if this commercial appliance is

used for other than normal, commercial use or when it is used in a manner

that is inconsistent to published user or operator instructions and/or

installation instructions.

3. Service calls to correct the installation of your commercial appliance,

to instruct you on how to use your commercial appliance, to replace

or repair house fuses, or to correct external wiring or plumbing.

4. Service calls to repair or replace appliance light bulbs, air filters, or water

filters. Consumable parts are excluded from warranty coverage.

5. Damage resulting from improper handling of product during delivery,

theft, accident, alteration, misuse, abuse, fire, flood, acts of God,

improper installation, installation not in accordance with local electrical

or plumbing codes, or use of products not approved by Maytag.

6. Pick up and delivery. This commercial appliance is designed to be

repaired on location.

7. Repairs to parts or systems resulting from unauthorized modifications

made to the commercial appliance.

8. The removal and reinstallation of your commercial appliance if it is

installed in an inaccessible location or is not installed in accordance

with published installation instructions.

9. Damage resulting from exposure to chemicals.
10. Changes to the building, room, or location needed in order to make the

commercial appliance operate correctly.

11. Factory specified replacement parts on commercial appliances with

original model/serial numbers that have been removed, altered, or cannot

be easily determined.

12. Discoloration, rust, or oxidation of stainless steel surfaces.
13. Factory specified replacement parts as a result of incorrect diagnosis

or repair by an “unauthorized” service company.

14. Replacement parts during the sixth through seventh years from the date

of original purchase where the commercial appliance is installed, operated

and maintained in a setting other than a vended and/or multi-housing

environment.

15. Replacement parts during the sixth through seventh years from the

date of original purchase where the defective part is not preventing the

functioning of the product.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A 

PARTICULAR PURPOSE, ARE LIMITED TO FIVE YEARS OR THE SHORTEST PERIOD ALLOWED BY LAW. Some locations may not allow 

limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives  

you specific legal rights, and you also may have other rights that vary.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.  

MAYTAG SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some locations do not allow the exclusion or limitation 

of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, 

and you also may have other rights that vary by location.

03/17

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the 

representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes  

with this major appliance, you should ask your retailer about buying an extended warranty. The benefits to you given by this warranty  

are in addition to other rights and remedies available to you under a law in relation to the goods or service to which this warranty relates. 

Please contact Maytag for further information on warranty terms.

SEVEN YEAR LIMITED WARRANTY

For written correspondence:

Maytag Commercial Laundry Service Department

2000 N M 63

Benton Harbor, Michigan 49022-2632 USA

WHAT IS COVERED

IF YOU NEED SERVICE:
Contact your authorized Maytag Commercial Laundry distributor. To locate your authorized Maytag Commercial Laundry distributor, 

visit 

www.MaytagCommercialLaundry.com.

WHAT IS NOT COVERED

FIVE YEAR LIMITED WARRANTY  

(PARTS ONLY — LABOR NOT INCLUDED)

For the first five years from the original date of purchase, 

when this commercial appliance is installed, maintained, 

and operated according to the instructions attached to 

or furnished with the product, Maytag brand of Whirlpool 

Corporation (hereafter “Maytag”) will pay for factory  

specified replacement parts to correct defects in materials  

or workmanship that existed when this commercial appliance 

was purchased. This limited warranty does not include labor. 

SIXTH THROUGH SEVENTH YEAR LIMITED WARRANTY 

(CERTAIN COMPONENT PARTS ONLY –  

LABOR NOT INCLUDED)

In the sixth through seventh years from the date of original 

purchase, when this commercial appliance is installed, 

operated, and maintained in a vended and/or multi-housing 

environment ONLY according to instructions attached to 

or furnished with the product, Maytag will pay for factory 

specified replacement parts for the following components to 

correct non-cosmetic defects in materials or workmanship 

in the part that prevent functioning of the product and that 

existed when this commercial appliance was purchased.  

This is a limited 7-year warranty on the below named parts 

only and does not include labor. 
Drive Bearings, Tub Seal, Bearing Spacer, Hub, Cross Piece, 

Drum, Rear Tub, Front Tub, Drum Shaft
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS 

LIMITED WARRANTY SHALL BE PART REPLACEMENT AS 

PROVIDED HEREIN. Maytag recommends that you use an 

“authorized” service provider to diagnose and repair your 

Commercial Laundry product. Maytag will not be responsible 

under this warranty to provide additional replacement parts as 

a result of incorrect diagnosis or repair by an “unauthorized” 

service company. Except in the European Union, this limited 

warranty is valid only when the commercial appliance is used 

in the country in which it was purchased. This limited warranty 

is effective from the date of the original consumer purchase. 

Proof of original purchase date is required to obtain service 

under this limited warranty.

Summary of Contents for MHN33PD





















Reviews: