3
1.
Scope
This installation manual specifies the installation and maintenance requirements for crystalline silicon PV
modules ( hereinafter referred to as " monofacial modules" ) manufactured by Maysun Solar Corporation ( hereinafter
referred to as "Maysun").
This installation manual is intended for the installation and maintenance of monofacial modules ( hereinafter
referred to as " monofacial modules" ) , and helps customers to correctly install the photovoltaic power generation
system, so that the design system can realize its potential. This installation manual does not apply to the installation
of the Maysun double glass bifacial modules and shingled modules.
2.
The Introduction Of Installation Manual
Thanks for choosing the crystalline silicon PV module of Maysun Solar. This manual contains important
electrical and mechanical installation information. For correct installation and stable power output, please install and
maintain the modules Carefully read and understand all installation instructions in the manual, and Keep this manual
in a safe place for future reference (care and maintenance) and in case of sale or disposal of the modules.
This manual does not constitute a warranty, expressed or implied. Maysun does not assume responsibility and
expressly disclaims liability for loss, damage, or expense arising out of or in anyway connected with installation,
operation, use or maintenance of modules.
The PV modules should be installed in accordance with all safety precautions and local laws and regulations
of this manual and should be installed and serviced by qualified personnel with knowledge of the mechanical and
electrical requirements of the system.
The mechanical and electrical installation of the PV modules shall be made in accordance with applicable laws
and regulations, including electrical, construction and electrical connection requirements. These regulations vary
depending on the installation site, such as building roofs, surface mounts, in-vehicle applications, and soon.The
requirements may vary depending on the installation system voltage, the use of DC or AC. Please refer to the
relevant local laws and regulations.
Any questions, please contact with the salesman or customer service personnel of Maysun Solar for further
explanations.
3.
Safety Precautions
Potentially lethal DC voltages can be generated whenever PV Modules are exposed to a light source,
therefore, avoid contact with electrically active parts and be sure to isolate live circuits before attempting to make
or break any connections.
When working on electrical connections, remove all metallic jewellery, use properly insulated tools
and wear appropriate personal protective equipment to reduce the risk of electric shock.
DO NOT stand or step on, damage or scratch the front or back side surfaces of the module .
Broken modules cannot be repaired and contact with any module surface or frame can lead to electrical
shock.
DO NOT use a module with broken glass or torn substrate.
DO NOT disassemble the modules or remove any part of the module .
Protect the electrical plug contacts against corrosion and soiling. Make sure that all connectors are
corrosion free and clean before making the connection .
DO NOT install or handle modules when they are wet or during periods of high wind .
Summary of Contents for MS M-36 Series
Page 8: ...8 www maysunsolar com...
