11
778m m
(30.6in)
Φ7*10mm(0.28*0.39 n)
INSTALLING HOLES
1 956mm
(77.0in)
Figure 3.
PV module installed with Single- axis Tracing System
1) M6 Stainless Bolt
3
) Spring Stainless Washer
7.2 Grounding
2) Flat Stainless Washer
4
) HEX Stainless Nut
All module frames and mounting racks must be properly grounded in accordance with the appropriate
respective National Electrical Code.
Proper grounding is achieved by bonding the module frame( s) and all metallic structural members
together continuously using a suitable grounding conductor. The grounding conductor or strap may be copper,
copper alloy, or any other material acceptable for use as an electrical conductor per respective National
Electrical Codes. The grounding conductor must then make a connection to the earth using a suitable earth ground
electrode.
4
2
3
1
Summary of Contents for MS M-36 Series
Page 8: ...8 www maysunsolar com...
