Installation and operational instructions for
ROBA
®
-servostop
®
Type 8980.00_00
Sizes 50 - 160
(B.8980.EN)
06/10/2022 GF
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten
Phone: +49 8341 804-0, Fax: +49 8341 804-421
Page 25 of 26
your reliable partner
15
Disposal
Our electromagnetic brake components must be
disposed of separately as they consist of different
materials. Please also observe the relevant authority
regulations. Code numbers may vary according to the
disassembling process (metal, plastic and cables).
Electronic components
(Rectifier / Switch):
Products which have not been disassembled can be
disposed of under Code No. 160214 (mixed materials) or
components under Code No. 160216, or can be disposed
of by a certified disposal firm.
Brake bodies made of steel with coil/cable and all
other steel components:
Steel scrap
(Code No. 160117)
Brake rotor (steel or aluminum pads with friction
linings):
Brake linings
(Code No. 160112)
Guidelines on the WEEE Directive 2012/19/EU
Avoidance of waste from electrical and electronic devices
and the reduction of such waste through recycling.
Our electromagnetic products (brakes, clutches) as well
as the components required to control them (rectifiers)
are frequently used in electrical and electronic devices
within the appropriate area of application of WEEE,
independent of the applicable product categories.
The stated products do not fall within the area of
application of this Directive. They have been classified as
electromagnetic / electronic components
(VDE 0580) or
as electronic equipment (DIN EN 50178), and have been
determined for installation in devices for "use in
accordance with the intended purpose". Only products
which are to be viewed as devices in terms of the
Directive and not as parts or components are subject to
registration obligations.
